DOMRAEM manufactures smart LED controllers and Zigbee devices, featuring ESP32-based WLED hardware for advanced DIY lighting and home automation projects.
DOMRAEM is a manufacturer of advanced smart lighting control solutions, catering primarily to the DIY and smart home automation communities. The brand is distinguished by its range of digital LED controllers powered by ESP32 and ESP8266 microcontrollers, designed specifically to run open-source WLED firmware. These controllers enable users to manage addressable LED strips (such as WS2812B, SK6812, and WS2811) with sophisticated effects, music synchronization, and seamless integration into home assistant platforms like Home Assistant and Zigbee2MQTT.
In addition to Wi-Fi-based WLED controllers, DOMRAEM produces Zigbee-compatible devices that allow for local control of smart home infrastructure without reliance on proprietary cloud services. Their products typically feature versatile voltage inputs (DC 5V-24V), high-current outputs, and built-in microphones for sound-reactive lighting. DOMRAEM products are widely used by hobbyists for creating immersive ambient lighting, architectural accents, and holiday displays.
Ultimi manuali da manuals+ selezionati per questo marchio.
Guarda i video di configurazione, installazione e risoluzione dei problemi per questo marchio.
Domande frequenti su manuali, registrazione e supporto per questo marchio.
Long press the 'Opt' button on the controller for more than 10 seconds. This will reset the device and activate the 'WLED-AP' hotspot mode.
The default password for the 'WLED-AP' Wi-Fi hotspot is 'wled1234'.
If the controller is powered but the strip is off, ensure the GPIO12 Relay configuration is set correctly in the WLED settings (refer to the manual for specific GPIO settings). Also, verify that your power supply voltage matches the LED strip requirements (e.g., use a 5V supply for 5V strips).
Firmware updates (OTA) should be performed carefully using the correct .bin file for your specific model (ESP32 or ESP8266). Links to firmware are often found in the product manual or the WLED project usage guides.