Giada iM1-210 COM Module User Manual

Giada iM1-210 COM Module

Istruzioni per l'uso

• Unpacking: Carefully remove the Giada IM1-210 module from its packaging.
• Static Precautions: Before handling the module, ensure you are wearing a wrist-grounding strap to prevent electrostatic discharge (ESD) damage.
• Power Disconnection: Always ensure the power supply is disconnected before installing or removing any components.
• Module Installation: Mount the IM1-210 module onto a compatible carrier board according to the carrier board’s instructions. Ensure all connectors are properly aligned and seated.
• Peripheral Connections: Connect necessary peripherals such as display (HDMI, DP, eDP, or LVDS), camera (MIPI-CSI), USB devices, Ethernet cables, and serial devices to the carrier board.
• Power Connection: Connect a DC-IN 5V power supply (within the 4V to 5.25V range) to the carrier board.
• Operating System Installation: Install your chosen operating system (Windows 11 or Linux 64-bit) onto the module’s eMMC storage or an external SATA III drive. Refer to your OS installation guide for detailed steps.
• First Boot: Power on the system. Monitor the boot process and ensure all connected peripherals are recognized.
• The module supports multiple display outputs: HDMI, DisplayPort, eDP, and dual-channel LVDS.
• Note that eDP and LVDS are co-lay, meaning they share some resources and may not be usable simultaneously in all configurations. Consult your carrier board documentation for specific limitations.
• Configure display settings within your operating system to achieve desired resolutions and refresh rates (up to 4096 x 2160 @60 Hz for HDMI/DP, 3840 x 2160 @60 Hz for eDP, and 1920 x 1080 @60 Hz for LVDS).
• Connect Ethernet cables to the 2.5 Gigabit Ethernet ports on your carrier board.
• Configure network settings within your operating system to establish network connectivity. The module supports TSN (Time-Sensitive Networking).
• Connect MIPI-CSI cameras to the appropriate 2-lane or 4-lane MIPI-CSI interfaces on your carrier board.
• Install the necessary drivers and software for your specific camera modules within your operating system.

Dichiarazione

• Il copyright di questo manuale appartiene a Shenzhen JIEHE Technology Development Co., Ltd. (Giada, il marchio globale di JIEHE) e tutti i diritti sono riservati. La società si riserva il diritto di modificare questo manuale in qualsiasi momento senza preavviso. Le specifiche qui sono solo di riferimento, si prega di prendere il prodotto reale come standard.
• Senza l'autorizzazione ufficiale di Giada, altre aziende o individui non possono copiare, plagiare, tradurre o diffondere questo manuale per scopi commerciali.
• Le informazioni fornite in questo manuale sono accurate e affidabili. L'azienda non si assume alcuna responsabilità legale per le conseguenze derivanti dall'uso illecito di questo manuale.

Sicurezza

Avviso di sicurezza

• Leggere attentamente il manuale utente prima di configurare il prodotto Giada.
• Scollegare il cavo di alimentazione prima di installare i componenti interni
• La maggior parte dei componenti elettronici è sensibile alla carica elettrica statica, si prega di indossare un braccialetto antistatico durante l'installazione dei componenti interni.
• Non scollegare il cavo di alimentazione quando il sistema è in funzione per evitare danni ai componenti sensibili dovuti a picchi istantanei voltage.

Introduzione al prodotto

Breve introduzione

• The Giada IM1-210 is an SMARC V2.1.1 Module based on the Intel® Atom X7211RE/X7433RE with a long life cycle.
• It features integrated LPDDR5 on-board memory, on-board eMMC storage of up to 64GB.
• It offers a range of interfaces tailored for embedded applications, including GPIO extension, USB 2.0, CAN-FD, dual-channel LVDS for display, and MIPI-CSI for camera connectivity.
• These compact module is an ideal choice for automation and industrial control applications.

Immagine della scheda madre

Specifiche

Informazioni elettriche

Informazioni sulla scheda

Diagramma a blocchi

Definizione dell'interfaccia

P-PIN Primary (Top) Side

S-Pin Secondary (Bottom) Side

Risoluzione dei problemi

No Power / System Not Booting

• Controllare l'alimentazione: Ensure the DC-IN 5V power supply is correctly connected and providing power within the specified range (4V to 5.25V).
• Posti a sedere del modulo: Verify that the IM1-210 module is securely seated on the carrier board.
• Carrier Board Issues: If possible, test the carrier board with another compatible module or check its power indicators.
• Static Damage: If proper ESD precautions were not followed, static damage might have occurred. Contact support.

Nessuna uscita di visualizzazione

• Connessione via cavo: Ensure display cables (HDMI, DP, LVDS, eDP) are securely connected at both ends.
• Ingresso monitor: Verificare che il monitor sia impostato sulla sorgente di input corretta.
• Installazione del driver: Ensure graphics drivers are correctly installed in your operating system.
• Compatibilità dello schermo: Check if the display resolution and refresh rate are supported by both the module and the monitor.
• eDP/LVDS Conflict: If using eDP or LVDS, ensure there are no conflicts with other display outputs if they are co-lay.

Peripheral Not Detected (USB, Ethernet, Serial)

• Installazione del driver: Ensure all necessary drivers for your operating system are installed.
• Connessione fisica: Check the physical connection of the peripheral to the carrier board.
• Impostazioni BIOS/UEFI: Verify that the relevant ports are enabled in the system’s BIOS/UEFI settings (if applicable to your carrier board).
• Funzionalità del dispositivo: Test the peripheral with another system to ensure it is not faulty.

Instabilità del sistema / arresti anomali

• Surriscaldamento: Ensure adequate airflow around the module, especially in high-temperature environments (-40°C ~ 85°C operating range). Verify that any heatsinks or cooling solutions are properly installed.
• Fluttuazioni di potenza: Use a stable power supply. Avoid disconnecting power while the system is running.
• Problemi di memoria: While memory is onboard, ensure the system is not running out of memory for demanding applications.
• Conflitti software: Check for recently installed software or drivers that might be causing conflicts.

Informazioni sui contatti

• Shenzhen JIEHE Sviluppo Tecnologico Co., Ltd.
• Websito: www.giadatech.com
• Telefono: +86-755-3330 0336
• E-mail: support@giadatech.com
• Indirizzo: 37F, Holdfound Sky Plaza Office Building, 11008 Beihuan Blvd., Nanshan, SZ, Cina, 518051