Keeson RC309A Remote Control User Manual

Keeson RC309A Remote Control

Specifiche

• Nome del prodotto: TELECOMANDO
• Modello: RC309A
• Ingresso: 2 batterie AAA 1.5V
• Produttore: Keeson Technology Corporation Limited
• Paese di Produzione: Cina

Istruzioni per l'uso

Figure 1 illustrates the buttons on the remote control.

1. Testa su
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Testa in giù
   Press and hold the HEAD DC NNN button of the remote, the head actuator moves in, and stops when released.
3. Alza il piede
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Piede giù
   Press and hold the FOOT button of the remote, the foot actuator moves in, stop when released.
5.  Piatto
   lick FLAT button, the bed goes flat. Stop when you click any button during the process of going flat.
6. Massaggiare la testa 
   lick MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2;
7. Pulsante ZG
   Click the ZG button, the actuator moves to the ZG position, stop when clicking any button during the movement.
8. Memory Favorite position
   licking once will move the app to the Favorite position; long-pressing to memorize the position. The backlight will flash twice, and releasing the button will continue the flashing.
9. Serratura
   Press and hold the child lock button until the red light flashes twice, indicating that the child lock is successfully engaged. During the locking process, pressing any button will cause the red light to flash for 2 seconds, indicating that the lock is engaged.

Informazioni sul prodotto

• Product Name: REMOTE CONTROL
• Modello: RC309B
• Input: 2 x Battery AAA 1.5V
• Produttore: Keeson Technology Corporation Limited
• Paese di produzione: Cina

Avviso FCC:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can adiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Riorientare o riposizionare l'antenna ricevente.
• Aumentare la distanza tra l'apparecchiatura e il ricevitore.
• Collegare l'apparecchiatura a una presa di corrente appartenente a un circuito diverso da quello a cui è collegato il ricevitore.
• Per assistenza, consultare il rivenditore o un tecnico radio-TV esperto.

Eventuali cambiamenti o modifiche non espressamente approvati dalla parte responsabile della conformità potrebbero invalidare l'autorità dell'utente a utilizzare l'apparecchiatura. Questo dispositivo è conforme alla parte 15 delle Norme FCC. Il funzionamento è soggetto alle due condizioni seguenti:

1. Questo dispositivo non può causare interferenze dannose,
2. Questo dispositivo deve accettare qualsiasi interferenza ricevuta, comprese quelle che potrebbero causare un funzionamento indesiderato.

Informazioni sull'esposizione alle radiofrequenze

Il dispositivo è stato valutato per soddisfare i requisiti generali di esposizione alle radiofrequenze. Il dispositivo può essere utilizzato in condizioni di esposizione senza restrizioni.

Avviso ISED RSS:

This device complies with Innovation, Science and Economic Development Canada licence, exemplifying RSS standard(s). Operation is subject to the following two conditions:

• Questo dispositivo non deve causare interferenze.
• This device must accept any interference, including interference that mav cause undesired operation of the device.

Risoluzione dei problemi

If the remote control is not functioning as expected:

• Controllare le batterie: Ensure that two AAA 1.5V batteries are correctly inserted and have sufficient charge.
• Blocco bambini: If the remote is unresponsive and the red light flashes for 2 seconds when a button is pressed, the child lock may be engaged. Refer to section 1.7 to disengage the child lock.
• Interferenza: This device complies with FCC rules regarding interference. If you experience unexpected operation, it might be due to external interference. Ensure there are no strong radio frequency sources nearby.

Domande frequenti

Q: What type of batteries does the RC309A remote control use?
A: The remote control requires 2 x AAA 1.5V batteries.

Q: How do I stop the bed from moving once I’ve pressed a position button?
A: For continuous movements like Head Up/Down or Foot Up/Down, release the button to stop. For preset positions like Flat or ZG, clicking any button during the movement will stop the process.

Q: What does it mean if the red light flashes for 2 seconds when I press a button?
A: This indicates that the child lock feature is currently engaged. You will need to disengage the child lock to use the remote’s functions (refer to section 1.7).

D: Posso modificare il telecomando?
A: Any changes or modifications not expressly approved by the manufacturer could void your authority to operate the equipment and are not recommended.