LTECH D40 DMX512 Decoder Instruction Manual

Sopraview

Schermo OLED
8 bit/16 bit
4 kinds of DMX interfaces
Dimming curve: 0.1-9.9
Short circuit / Over current / Overheat protection

D40
DMXS12 DCODER

Introduzione al prodotto

1. Designed for Hi-power multiple channels application, 40 channels output, and Max. 3A current per
   channel, up to 2880W output power.
2. The human-computer interaction interface is composed of an OLED screen and 3 buttons, which
   displays rich content and is simple and fast to operate.
3. The number of DMX channels can be set to CH01/CH02/CH03/CH04/CH05/CH08/CH16/CH24/
   CH32/CH40, which can realize independent address independent channel control, or one address
   to control multiple channels.
4. The PWM frequency can be set to 300/600/1200/1500/1800/2400/3600/7200/10800/14400/
   Frequenza
5. 3-pin XLR, 5-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation,
   improve signal transmission efficiency and anti-interference ability, the green terminal also has
   segnale ampfunzione lificatore.
6. With the operations can be completed via the RDM master console, such as parameters browsing
   & settings, DMX address settings, equipment recognition, etc.
7. Modalità di controllo master DMX;
8. Con funzione di aggiornamento del firmware.
9. With short circuit, over current and over temp. protection, as well as warning function when a fault
   si verifica.
10. Con gestione dello stato di accensione e funzione di autotest rapido.
11. Sono disponibili livelli di grigio a 16 bit (65536 livelli) / 8 bit (256 livelli).
12. Disponibile per curva di regolazione standard, lineare, LOG o personalizzata da 0.1 a 9.9.
13. The device has 10 built-in personalized lighting effects. You can enter the setting interface of the
    DMX master mode and select different lighting effects to achieve precise output control of other
    decodificatori.
14. Parameters can be set and modified through the RDM master control or mobile phone APP,
    eliminating the need for high-altitude operations.

Specifiche tecniche

Dimensioni del prodotto

Descrizione del componente principale

Interfaccia dello schermo OLED

Schema elettrico

1. Collegamento delle luci LED:

2. DMX Decoder Mode
D40 is equipped with DMX terminals for users’ selection. The following diagram takes 3-pin XLR as an
example, stesso metodo di collegamento per gli altri tre: Rj45 e XLR a 5 pin e terminale verde (con ampfunzione lifier).

3. Modalità di controllo DMX

• If the recoil effect occurs because of longer signal line or bad line quality, please try to connect
  0.25W 90-120Ω terminal resistor at the end of each line.

4. Schema di collegamento di 4 tipi di terminali DMX/RDM:

Questi 4 terminali possono essere collegati in modo misto.

• Installation attentions: Please reserve enough ventilation distance between decoders (>20mm),
  be sure not to block the vent, or it will affect lifetime of decoder for poor heat dissipation.

5. Lo schema di collegamento di AMP segnale ampterminale di alimentazione:

• Collegamento con terminale verde o un extra amplifier will be needed when more than 32 decoders
  are connected or use overlong signal wire (as shown below).Signal amplifier should not be more
  than 5 times continuously.

Tabella di impostazione degli indirizzi a 8 bit

9

10

Tabella di impostazione degli indirizzi a 16 bit

11

Lavora con l'editor RDM

D40 can work with LTECH RDM editor (Model: WiFi-RDM01) to realize changing
the parameters by long-range setting, wiring diagram as below:

Istruzioni per l'interfaccia dell'app editor RDM

Download the App, setting the D40 parameters (frequency, bit, curve, modes, dimming range,
screensaver, etc.) after well connecting the RDM editor, more details, please check the manual
of WiFi-RDM01.

Well installation of products first, then working with WiFi -RDM01 to realize setting parameters
and firmware upgrade by App.

a: Click “Add”, edit the address in corresponding box.
b: Click “ID”, get more product details.
c: Click ” “, enter edited interface.
d: Click “No.”, issue the recognizing command.

Supporting WiFi-RDM01 upgrade
and DMX driver upgrade.

Attenzione

• L'installazione e la messa in servizio del prodotto devono essere eseguite da un professionista qualificato.
• Our company products are and not lightning proof non-waterproof(special models excepted).
  Please avoid the sun and rain. When installed outdoors, please ensure they are mounted
  in a waterproof enclosure or in an area equipped with lightning protection devices.
• Una buona dissipazione del calore prolungherà la vita lavorativa dei prodotti. Si prega di garantire una buona ventilazione.
• Si prega di verificare se il volume di lavorotage utilizzato è conforme ai requisiti dei parametri di
  prodotti.
• The diameter of wire used must be able to load the light fixtures you connect and ensure
  the firm wiring.
• Before you power on products, please make sure all the wiring is correct in case of
  incorrect connection that causes damage to light fixtures.
• If a fault occurs, please do not attempt to fix products by yourself. If you have any
  question, please contact your suppliers.

Accordo di garanzia

• Termini di garanzia dalla data di consegna: 5 anni.
• Durante i periodi di garanzia vengono forniti servizi gratuiti di riparazione o sostituzione per problemi di qualità.

Esclusioni di garanzia di seguito:
Following conditions are not within the guarantee range of free repairing or replacement
servizi:

• Oltre i periodi di garanzia.
• Qualsiasi danno artificiale causato da alto voltage, sovraccarico o operazioni improprie.
• Prodotti con gravi danni fisici.
• Danni causati da calamità naturali e forza maggiore.
• Le etichette di garanzia e i codici a barre sono stati danneggiati.
• Nessun contratto firmato dalla nostra azienda.

1. Repair or replacement provided is the only remedy for customers. Our company is
   not liable for any incidental or consequential damage unless it is within the law.
2. Our company has the right to amend or adjust the terms of this warranty, and
   release in written form shall prevail.

• This manual is subject to changes without further notice. Product functions depend on the
  goods. Please feel free to contact our official distributors if you have any question.