MULTIBRACKETS 5605 Wall Bracket

Specificazione

• Prodotto: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Tipo: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Colore: Finitura in metallo nero
• Materiale: Heavy-duty solid steel construction
• Compatibilità dello schermo: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Capacità di peso: Up to 125 kg (~275 lbs) load support
• Supporto VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Gamma di inclinazione: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Caratteristiche:
  • Dual long-reach arms for flexible viewposizioni
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Tipo di installazione: Wall mount, articulating bracket
• Colore: Nero

IMPORTANTE!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Consulta un professionista.

Avvertimento!
Sempre controllo IL profondità of IL buchi Prima di partenza an installazione.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

AVVERTIMENTO 
Gravi lesioni personali e danni alla proprietà possono derivare da un'installazione o un montaggio impropri. Leggere attentamente il seguente avviso prima di iniziare.

• I prodotti devono essere installati da professionisti.
• Se non si comprendono le istruzioni o si hanno dubbi o domande, contattare un installatore locale qualificato.
• Non installare o assemblare se il prodotto o l'hardware sono danneggiati o mancanti. Se sono necessarie parti di ricambio, contattare il distributore locale per assistenza.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Non utilizzare questo prodotto per applicazioni diverse da quelle per cui è stato originariamente concepito.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Il produttore non si assume alcuna responsabilità per il montaggio sulla parete verticale né per eventuali danni incidentali o consequenziali da esso derivanti.
• Il produttore declina ogni responsabilità per modifiche, installazione impropria o installazione oltre la gamma di peso specificata.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Elenco passato

INSTALLAZIONE

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Fissare il modello della piastra a muro (BB) alla parete nel punto di installazione desiderato.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

NOTA: Do not use Wall Anchor (I) for wood stud installation.

OPZIONE DI INSTALLAZIONE 2: Installazione su muro di cemento/mattoni

1. Fissare il modello della piastra a muro (BB) alla parete nel punto di installazione desiderato.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Inserire 6 x tasselli a muro (I) nei fori. Fissare la piastra a muro alla parete con 6 x bulloni a testa svasata (H) e 6 x rondelle (H).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

AVVERTIMENTO: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Fissaggio del televisore al supporto (per schermi con fori per bulloni più grandi) Per i televisori con fori per bulloni più grandi di VESA 300×300,400, 200,400×400,600, 400×800, 600×XNUMX, XNUMX×XNUMX mm, utilizzare le staffe per TV e le barre di estensione per installare il televisore al supporto.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

NOTA: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at monta-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Fissare la TV sul supporto

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

NOTA: Se le staffe della TV non vengono fissate al supporto con le staffe di sicurezza AA, il televisore potrebbe sollevarsi accidentalmente dalle barre di estensione, con conseguenti danni a persone o cose.

Regolazione livellamento -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Regolazione dell'inclinazione -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

NOTA: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Utilizzare le clip di gestione dei cavi integrate sui bracci per instradare i cavi sul retro o sul lato del televisore.

Dimensione

CERTIFICATO DI GARANZIA

MULTISTAFFE “™ Limitato Garanzia

Multiparentesi mandati suo prodotti A be gratuito of difetti in materiale E lavorazione per IL del prodotto Garanzia Periodo.

IL Garanzia periodo inizia on IL originale acquistare data of IL prodotto

Tutto Multiparentesi prodotti Sono coperto by a limitato prodotto garanzia

• CINQUE (5) anni per metallo video monitorare mounts, Tutto scaffaliE non-electrical scaffale accessori
• DUE (2) anni per gaslifts E sit-stand postazioni di lavoro
• UNO (1) anno per Tutto motorizzato e/o automatizzato prodotti, plastica altoparlante mounts, Tutto altoparlante stands, Tutto mobilia, Tuttolegna (pannello di fibra ottica) accessori

Per garanzia affermazioni fatto durante IL Garanzia Periodo, MULTIPARENTESI Volere sostituire Qualunque difettoso prodotto parte gratuito of charge. Should a parte on tuo Multiparentesi prodotto fail, Per favore creare anRMA caso on Italiano:multibrackets.com/support A Fare a garanziareclamo. We Volere attendere tuo documentazione E Poi discuss ILproblema con Voi, E una volta we confirm IL prodotto is Sotto guerraranty, we Volere nave sostituzione parti A Voi. Questo Limitato Garanziafa non copertina IL costi of rimozione E sostituzione difettoso partida tuo Multiparentesi prodotto. COSÌ, if tuo problema richiede ariparazione technician, Voi dovere paga Qualunque lavoro accuse.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. Italiano:multibrackets.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the websito: www.multibrackets.com

 

Documenti / Risorse

MULTIBRACKETS 5605 Wall Bracket [pdf] Guida all'installazione 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

Riferimenti

• Manuale d'uso