NOCK Cover Insert Deck Frame Instruction Manual

NOCK Cover Insert Deck Frame

Specifiche

NOCK Deck Frame, 7 meters

• 1 X (unspecified component)
• 1 X (unspecified component)
• 4 X (35 mm / 1.45 m)
• 1 X (35 mm / 1.2 m)
• 2 X (35 mm / 0.7-1.4 m)
• 2 X (35 mm / 1-1.9 m)
• 6 X (35 mm / 1-1.9 m)
• 6 X (30 mm / 0.3 m)
• 2 X (35 mm / 0.25 m)
• 10 X (35 mm x 9 cm)
• 1 X (8 mm)

NOCK Deck Frame, 8 meters

• 1 X (unspecified component)
• 1 X (unspecified component)
• 5 X (35 mm / 1.45 m)
• 1 X (35 mm / 0.75 m)
• 2 X (35 mm / 0.7-1.4 m)
• 2 X (35 mm / 1-1.9 m)
• 6 X (35 mm / 1-1.9 m)
• 7 X (30 mm / 0.3 m)
• 2 X (35 mm / 0.25 m)
• 10 X (35 mm x 9 cm)
• 1 X (8 mm)

Istruzioni per l'uso

Informazioni importanti sulla sicurezza

• Always be two people during assembly.
• Read the manual before assembly.
• Warning: Pinch Hazard.
• Indossare guanti da lavoro.

Installazione completataview (7-meter Deck Frame)

Refer to the diagram for component placement.

1. Identificare i componenti:
   • a: 2 X Pulpit leg (Stern side)
   • b: 4 X Overlaying tube
   • c: 1 X Overlaying tube
   • d: Connector overlying tube
   • e: T-connector
   • f: 6 X Deck leg
   • g: 2 X Pulpit leg (Bow side)
   • h: End Elbow
2. Assemble the frame according to the visual guide, connecting components (a), (b), (c), (d), (e), (f), (g), and (h) as shown.

Installazione completataview (8-meter Deck Frame)

Refer to the diagram for component placement.

1. Identificare i componenti:
   • a: 2 X Pulpit leg (Stern side)
   • b: 5 X Overlaying tube
   • c: 1 X Overlaying tube
   • d: Connector overlying tube
   • e: T-connector
   • f: 6 X Deck leg
   • g: 2 X Pulpit leg (Bow side)
   • h: End Elbow
2. Assemble the frame according to the visual guide, connecting components (a), (b), (c), (d), (e), (f), (g), and (h) as shown.

PRECAUZIONE

Attenzione

1. Always be two people during assembly
2. Read the manual before assembly
3. Call us if you have any questions!

Avvertimento: pinch hazard
Indossa guanti da lavoro

Contenuto

Installazione finitaview

NOCK , 7 meter

NOCK  8 meter

ContenutoInstallazione finitaview NOCK  9 meter
Contenuto Installazione finitaviewNOCK  10 meter
Contenuto Installazione finitaviewNOCK  11 meter
Contenuto

Installazione finitaview 

NOCK 12 meter
Contenuto

Installazione finitaview

Start at the stern

Attach the top tube to the supports you started withAdjust the support legsRepeat steps 4 and 5 for the middle support legs resting on the deckRepeat steps 3, 4 and 5 for the front support legs attached to the pulpit Distribute the support legs evenly

Risoluzione dei problemi

• Difficoltà nell'assemblaggio dei componenti: Ensure all parts are correctly oriented. Some connections may require firm pressure. Always work with two people.
• Parti mancanti: Double-check the contents against the specifications list for your model (7m or 8m). If parts are genuinely missing, please contact us.
• Unstable frame: Ensure all connections are fully secured. Verify that all legs (pulpit and deck legs) are properly installed and making firm contact with the ground/deck.