ROXIDE SH-100 Rectifier Instruction Manual

ROXIDE SH-100 Rectifier

Funzioni principali

• AC to DC Rectification
• Potenza nominale
• Braking Control Logic
• Protection & Reliability

Parametri chiave

• Ingresso volumetage: 380/440 V CA
• Volume di uscitatage: 160/190 V CC
• Corrente di uscita: 3A (continuo)
• Temperatura ambiente: Temperatura di esercizio -45°C ~ +145°C

Schema elettrico

Codice colore filo:

• R = Rosso
• Y = Giallo
• BK = nero
• “R,R” Input alternating current voltage
• “BK,BK” Output alternating current voltage
• “Y,Y” Short circuit or external switch

Assegnazioni dei terminali

• R, R: Input alternating current voltage
• Y, Y: Short circuit or external switch
• BK, BK: Output alternating current voltage

Note importanti

1. Strictly prohibited to connect to variable frequency power supply!
2. Please confirm that the motor brake resistor is normal; otherwise, the rectifier may be burned out! (The brake resistor is typically between 200-600 ohms. Do not connect to the rectifier if the resistance is lower than 50 ohms.)

Risoluzione dei problemi

(No specific troubleshooting steps were provided in the original manual text.)

Consigli generali per la risoluzione dei problemi:

• If the rectifier is not functioning, first check all wiring connections for proper seating and correct polarity.
• Verificare che il volume di ingressotage matches the specified range (380/440VAC).
• Ensure that the motor brake resistor is within the acceptable range (200-600 ohms) and not below 50 ohms, as this can cause damage.
• Confirm that the power supply is not a variable frequency type.
• If issues persist, disconnect power and consult a qualified technician.