Manuale di istruzioni
Controller Wireless per Switch
When charging, the red light is on, the full light is off, and the charging time is about 2.5 hours. When the running horse light flashes, it is in the search state, and the fixed green light is on in the connection state (NS)
ADATTO PER PIATTAFORMA SWITCH/PC
Introduzione alla funzione del prodotto
- This product is a Switch wireless Bluetooth controller, which is suitable for the Switch host platform. It can be remotely controlled and operate conveniently. It can be used for Switch host/and also supports PC x-input/steam PC games.
- The handle supports one-click wake-up of the host, and is equipped with a six-axis gyroscope/double vibration motor/supports Turbo continuous/M macro setting function.
- It supports connecting 4 handles to the host at the same time, and 4 LED indicators Indicate the connection port.
The handle has a built-in 800mAh rechargeable battery, which interface of the handle to recharge. the Type-c - Bluetooth 5.0 communication range: Test that the handle within 10 meters can play games normally without affecting the transmission signal strength.
- There are many hardware/software and applications for computer games, and uncertainty supports the use of six-axis somatosensory in computer simulators
Gestisci per cambiare host
- Wireless Bluetooth connection: Long press the handle start button for 2 seconds to enter the Bluetooth connection state. The handle has 4 channels of LED lights. Open the main interface of the NS host and then click to change the grip/order to enter the Bluetooth search state. Wait for the handle logo to appear on the host interface. Click Add to complete the connection.
- Funzione sveglia
: The handle has been connected to the host once and is remembered. When the host is in the boot state or hibernate state, press the wake-up key in the Switch host and the handle light will be automatically connected to the host.
La maniglia è collegata al computer:
Connect to the computer, and make sure that it supports Steam and Epic platforms (make sure that the computer has its own Bluetooth function) - Wired connection to the computer: wired TYPE-C data cable plug into the host
base USB connection, press any function key to connect to the computer with the host response handle. - Wireless connection to the computer 1: The computer comes with its own Blue
2. Click tooth function, and turn on the Blue tooth function on the computer the Bluetooth logo in the add device to add the Bluetooth device 3. Long press the circular start button at the top of the handle and wait for the computer to search for the device. The computer searches for the device identification Pro Controller
and click Add to complete the connection.
Come utilizzare le funzioni integrate
- The four-speed adjustment of the motor vibration: the turbo key the left 3d rocker key can adjust the vibration intensity up and down, 0-30%-70% 100% adjustable, the power-on defaults to 30%, increase up and down.
- Turbo continuous speed classification:
lurbo key right 3d up and down can adjust the Turbo speed, 5H212Hz→20Hz adjustable, default state 12Hz, handle automatic Turbo does not sleep.
Turbo continuous function: press the setting button for the first time, then press Turbo, which is semi-automatic TURB URBO, the second operation enters the fully automatic continuous function, the third operation cancels the continuous - Six-axis correction: minus key + HOME: In the hibernation state, first press the minus key to keep the same, then press HOME to enter the sensor calibration mode, (the handle indicator light flashes blue and green alternately) put the handle in the horizontal position, then press the key and release it, and the handle enters the calibration.
- Modalità di impostazione della funzione di programmazione macro 1:
1. Press the MACRO programming setting key and the key at the same time. At this time, the channel light ght flashes slowly to ent enter the programming state. When there is a key programming, it will flash to end the programming slowly,
2. Press the action keys that need to be programmed in order, such as the left rocker (up arid down, left and right), cross key (up and down, left and right), ABXY, LIRIZL ZRIL3R3 for Input. After the key input, the channel light will flash quickly a few Simes, indicating that the key has been recorded;
After editing, press the M1 or M2 programming key, and the channel indicator When the action kays exceed 16, the channel light no longer flashes quickly to prompt the key to automatically exit the macro definition state.) This program ramming mode can record the order of keys and the time (the interval between the two keys can record up to 2.54) - Modalità di impostazione della funzione di programmazione macro 2:
1. Press the MACRO programming setting key and key at the same time. At this time, the channel light flashes slowly to enter the programming state (red light Indicator)2. Press the action key that needs to be programmed, such as the cross key (up, down, left and right), ABXY, L\R\ZL/ZR\L3/R3 for input. After the key input, the channel light will flash quickly a few times, indicating that the key has been recorded;3. After editing, press the MI or M2 programming key, and the channel indicator light will always be on.
Clear the programming function: 1. Press the macro programming setting key at the same time, and then press and hold the key (or key). At this time. the channel light slowly flashes into the programming state. 2. Press the programming setting key again to clear the programming of the macro key.
After clearing, the channel light is on. - Handle ambient light off and adjustment:
(It can be adjusted when the handle is connected to the host) RSB-T is the combination key to switch the light mode: first press and hold the middle point of the right 30 joystick key, and then press the key to change the handle light color or off the ambient light
Avviso FCC
Questo dispositivo è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni:
(1) Questo dispositivo non deve causare interferenze dannose e (2) deve accettare qualsiasi interferenza ricevuta, comprese le interferenze che possono causare un funzionamento indesiderato.
NOTA 1: Questa apparecchiatura è stata testata e ritenuta conforme ai limiti per un dispositivo digitale di Classe B, ai sensi della parte 15 delle Norme FCC. Questi limiti sono concepiti per fornire una protezione ragionevole contro interferenze dannose in un'installazione residenziale. Questa apparecchiatura genera, utilizza e può irradiare energia a radiofrequenza e, se non installata e utilizzata in conformità alle istruzioni, può causare interferenze dannose alle comunicazioni radio. Tuttavia, non vi è alcuna garanzia che non si verifichino interferenze in una particolare installazione. Se questa apparecchiatura causa interferenze dannose alla ricezione radiofonica o televisiva, cosa che può essere determinata accendendo e spegnendo l'apparecchiatura, si consiglia all'utente di provare a correggere l'interferenza con una o più delle seguenti misure:
– Riorientare o riposizionare l’antenna ricevente.
– Aumentare la separazione tra l’apparecchiatura e il ricevitore.
-Collegare l'apparecchiatura a una presa di corrente appartenente a un circuito diverso da quello a cui è collegato il ricevitore.
- Per assistenza, rivolgersi al rivenditore o a un tecnico radio/TV esperto.
NOTA 2: Eventuali modifiche o alterazioni apportate a questa unità non espressamente approvate dalla parte responsabile della conformità potrebbero invalidare il diritto dell'utente a utilizzare l'apparecchiatura.
Il dispositivo è stato valutato per soddisfare i requisiti generali di esposizione RF. Il dispositivo può essere utilizzato in condizioni di esposizione portatile senza restrizioni.
Documenti / Risorse
 |
Controller wireless Shenzhen S086 per switch [pdf] Manuale di istruzioni HHC-S086, 2BDAIHHC-S086, 2BDAIHHCS086, Controller wireless S086 per switch, S086, Controller wireless per switch, Controller per switch, Switch, Controller |