SINOTIMER STC-916VA Temperature Controller

Sopraview

The external temperature detector can detect the temperature. Set the start and stop temperature. Cycle timing, start and stop time, timer switch. It is widely used in intelligent control, such as carbon heating, aquaculture, greenhouse, home life, and other places.

Controlli
Four buttons + Reset button: SET, FUN, UP, DOWN

Modalità di controllo della temperatura

• Premere il pulsante SET: Temperature control mode, Timing mode F01-F04
• Modalità riscaldamento: Start Temperature ON < Stop Temperature OFF
• Measured Temperature lower than Start Temperature ON, the connected device is ON.
• Measured Temperature over Stop Temperature OFF, the connected device is OFF.

Modalità di raffreddamento: Start Temperature ON > Stop Temperature OFF

• Measured Temperature over Start Temperature ON, the connected device is ON.
• Measured Temperature lower than Stop Temperature OFF, the connected device is OFF.

Modalità Ora

Press the FUN key to display F01, F02, F03, and F04 timing modes. Press the SET key to enter the setting state, and the corresponding contents are displayed blinking, waiting for the setting. Press the UP or DOWN key to adjust the blinking bit value. Press the FUN key to save and exit the Settings.

Modalità di visualizzazione LCD

• F01: Cycle Switch Mode – Start time delay ON, stop time delay OFF, and the Cycle timing.
• F02: Delay ON Mode – Now time is OFF, delayed (start time) ON.
• F03: Delay OFF Mode – Now time is ON, delayed (stop time) OFF, countdown completion, Turn off the output and exit the run.
• CD ON, CD OFF Switch Mode – Now time is OFF, delayed (start time) ON, after starting delayed (stop time) OFF, stop the time to finish the countdown, close out the output and exit the operation.

Appunti

• In modalità di controllo della temperatura: Blinking is based on the mode of heating or cooling.
• Under timing mode: Current running mode ON/OFF Blinking, Time symbol: blinking, meanwhile, time is running. After the start of the machine, Relay suction when running to ON, socket output indicator light, Relay shutdown at OFF light indicator.

Premere il pulsante FUN

1. Temperature mode: Press the FUN button, set up the start temperature and stop the temperature. The Temperature range is -40°C ~120°C. 2.2 Timing mode (F01-F04)
2. Press the FUN button, set up start hours, minutes/ stop hours, minutes, setrange of 0~99 hours 59 minutes.
3. Stato di funzionamento: consente la regolazione della temperatura/ora tramite il pulsante FUN.
4. Tenere premuto il pulsante FUN per 2 secondi per avviare/interrompere il cronometraggio corrente;

Premere il pulsante SU/GIÙ

1. Al momento della scintillazione numerica. Viene effettuata una regolazione numerica in base al pulsante SU e al pulsante GIÙ.
2. According to a UP button or DOWN button plus / minus 1, the long time value is automatically added and reduced
3. In stato non in esecuzione, allo stesso tempo, premere il pulsante SU e il pulsante GIÙ per 2 secondi per ripristinare le impostazioni di fabbrica.

Correzione della temperatura
Long press the FUN button during power on, and the system will automatically enter the temperature correction mode.

1. Long press FUN button, real time temperature calibration after 2 seconds. LCD first row display“CALIBRATION” and real time temperature. Correction value of LCD second row scintillation display. Adjust the correction value according to UP and DOWN button ( According to the adjusted calibration value, thermal time temperature changes accordingly.).
2. Real time temperature correction range: – 9.9 °CA~9.9 °C

• Funzione di memoria
  Tutte le impostazioni correnti verranno salvate dopo lo spegnimento.
• Test di fabbrica
  Reset the factory setting by pressing the UP & DOWN buttons for 3 seconds. The screen will display for one second, restoring the factory settings.

Specifiche

Intervallo di visualizzazione della temperatura	– 40 ~120°C
Precisione di visualizzazione della temperatura	0.1°C
Precisione	+/- 1% MAX
Precisione dei tempi	1 minuto
Volume di lavorotage	120 V CA
Corrente massima di lavoro	15A

Domande frequenti

How do I set the start and stop temperature?

Press the SET button to enter temperature control mode and adjust using the UP/DOWN buttons.

Cosa succede se va via la corrente?

The device has a memory function, so all current settings will be saved after power off.

Documenti / Risorse

SINOTIMER STC-916VA Temperature Controller [pdf] Manuale d'uso STC-916VA Temperature Controller, STC-916VA, Temperature Controller, Controller

Riferimenti

• Manuale d'uso