Indicatore di rotazione di fase LCD SWEVY SW360

Indicatore di rotazione di fase LCD

Avvertimento: During the testing do not touch any test pencil on any phase or any bare metal probe in order to avoid the electronic shock.

Caratteristiche

• Convenient and practical with compact and nice looking appearance
• PC material shell safe and durable
• Protection level CATIII 600V
• Basso volumetage automatically reminder and shuts down if there is no operation

Caratteristiche tecniche

1.  Display three digit LCD display with 18mm of text height
2. Sampling rate:3 times/second
3. Volume di eserciziotagIntervallo e: 40-600 V
4.  Working environment:Temperature:0℃to+40℃ Humidity:0-80%Rh
5.  Storage environment Temperature:-10℃to+60℃ Humidity:0-85%Rh
6.  Quiescent current less than 3mA
7. Power supply three of AAA battery
8.  Instrument size(H×W×D):116mm×66mm×26mm
9. Wire length:800mm
10. Accessories:1 of carrying case 3 of test clips

Descrizione del pannello

1. Connecting wire for testing
2. Schermo LCD
3. Indicatore sequenza fasi
4. Volume della batteriatage indicatore di stato
5. Vano batteria
6. Test clips Usage

1. After the battery is installed in the correct way, the yellow, green and red of three phase input terminals of the instrument should be reliably connected with the three phase electrical terminals to be tested.
   •  When there is no input or less than 40V,the LCD has no display.
   • When the measured three phase electricity lacks of phase the LCD will display as follows:
   • When the rotation direction of phase sequence is clockwise the LCD will display as follows:
   • When the rotation direction of phase sequence is anti-clockwise the LCD will display as follows:
     
2.  During the testing please observe whether there is a low voltage indicator on the LCD display. If there is it indicates that the battery voltage is lower than the normal value which will affect the instrument function and measurement accuracy Sometimes this situation will also cause the instrument to fail to start .At this time the battery should be replaced in time.
3.  After finishing the testing please disconnect the input terminal from the testing terminal.

Domande frequenti

What should I do if the LCD does not display anything?

Assicurare il volume di inputtage is above 40V and all connections are secure.

Come faccio a sapere se la batteria deve essere sostituita?

Monitorare il volume della batteriatage status indicator on the LCD. If it shows low voltage, sostituire la batteria.

Documenti / Risorse

Indicatore di rotazione di fase LCD SWEVY SW360 [pdf] Manuale di istruzioni Indicatore di rotazione di fase LCD SW360, SW360, Indicatore di rotazione di fase LCD, Indicatore di rotazione di fase, Indicatore di rotazione, Indicatore

Riferimenti

• Manuale d'uso