Sensore di temperatura Wi-Fi UB-SP-A1
“
Informazioni sul prodotto
Specifiche
- Modello del prodotto: UB-SP-A1
- Materiale: Aluminum frame + polycrystalline
bicchiere - Lunghezza del cavo: 5m
- Dimensioni: Standard
- Output Power (@STC): 6V-5%+10%
- Circuito aperto Voltage (@STC): 5V-5%+10%
- Vol. di lavoro standardtage (@STC):
2A-5%+10% - Standard Working Current (@STC):
2.1A-5%+10% - Short Circuit Current (@STC): 18.5%
- Cell Conversion Efficiency: 18.5%
Istruzioni per l'uso del prodotto
- Avoid Contact with Corrosive Substances: Do
not expose the product to strong corrosive substances. - Avoid Surface Damage: Do not scratch or hit
the surface of the solar panel with hard objects during use. - Avoid Bending Stress: Solar panels cannot
withstand bending stress during transportation and assembly. - Evitare ambienti ad alta temperatura: Non fare
place sensors directly in high-temperature environments.
Domande frequenti (FAQ)
D: Questo prodotto può essere utilizzato in ambienti interni?
A: No, this product is designed for outdoor use where it can
absorb sunlight to generate electrical energy.
D: Con quali dispositivi posso utilizzare questo prodotto?
A: This product is designed to be used with our GS1/GS2 series
devices for charging in outdoor environments.
D: Come posso pulire il pannello solare?
A: Usa un morbido, damp panno per pulire delicatamente la superficie del
solar panel to remove any dirt or debris. Do not use abrasive
addetti alle pulizie.
“`
Introduzione
This product converts solar radiation into electrical energy directly through the photoelectric or photochemical effect by absorbing sunlight. When used in conjunction with our GS1/GS2 series devices, it can charge the equipment in outdoor environments with sunlight exposure. This reduces the complexity of external deployment, promotes environmental sustainability, and saves energy and electricity.
Applications It is widely used in flower gardens, farms and other outdoor locations.
Features IP67back glue treatment Anti-drop aluminum frame Plug and Play DC5521 Interface Use with GS1 for a variety of outdoor scenarios
Specificazione
Product Model Material
Cable Length Dimensions Standard Output Power (@STC) Open Circuit Voltage (@STC) Standard Workting Voltage(@STC) Standard Working Current (@STC) Short Circuit Current (@STC) Cell Conversion Efficiency%
Specification UB-SP-A1
aluminum frame + polycrystalline glass 5m
340*240*17MM ±0.5 bare board 10W-5%+10%
6V-5%+10% 5V-5%+10% 2A-5%+10% 2.1A-5%+10%
18.5%
NOTA
1. This product cannot come into contact with strong corrosive substances. 2. Avoid scratching or hitting the surface of the solar panel with hard objects during use. 3. Solar panels cannot withstand bending stress during transportation and assembly. Do not place sensors directly in high-temperature environments.
Documenti / Risorse
 |
UBIBOT UB-SP-A1 Wifi Temperature Sensor [pdf] Guida utente UB-SP-A1 Wifi Temperature Sensor, UB-SP-A1, Wifi Temperature Sensor, Temperature Sensor, Sensor |