ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller User Manual

ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller

Informazioni sul prodotto

Caratteristiche

• Può essere controllato da telefono iOS/telefono Android
• Supporta le app "Smart Life" e "Tuya Smart"
• Voice control: Compatible with Alexa and Google home T mall Genie or Xiaodu speakers
• Funzione di temporizzazione: accensione/spegnimento automatico con funzione di temporizzazione
• Protezione da sovraccarico per una facile sostituzione dei tradizionali interruttori meccanici (necessita di neutro)
• Scena intelligente
• Gruppo di dispositivi

Informazioni sulla sicurezza

Risk of electric shock: Electricity can cause personal injury and properly damage if not handled properly. If you are unsure of any part of these instructions, seek professional help from a qualified electrician.

Installare

Avviso:

• Assicurarsi che l'alimentazione sull'interruttore sia disattivata prima del cablaggio.
• Neutral wire is required. Verify that the wall box contains a neutral wire (usually white). If the wall box does not have a neutral wire, try another location in the home or call a professional electrician to install the switch.
• I colori dei cavi indicati in questo manuale sono i colori abituali e possono variare in alcune case.
• Make sure the wire conductors are securely attached to each screw.
• Assicurarsi che il segnale Wi-Fi sia stabile e funzioni correttamente prima del cablaggio.
• Se non si ha esperienza nel cablaggio, chiamare un elettricista professionista.

Primo passo:

• Spegnere l'interruttore e testare l'alimentazione con un tester elettrico.
• Assicurarsi che l'interruttore sia spento prima del cablaggio.

Secondo passo:

• Remove existing wall panels; turn on power at breaker and use electrical tester to check which wire is the line; the tester will beep when near the line.
• Turn off the power at the circuit breaker; if there is a power outage, use an electrical tester, pull the existing switch out; mark the wiring and other wires; disconnect the power with pliers and remove the wires from the existing switch.
• Connect the switch wires to the wall box with the wire conductors according to the wiring diagram below.
• Terzo passo: Install the switch using the screws provided and snap the wall plate onto it.
• Il quarto passo: Riaccendi l'alimentazione dall'interruttore, quindi accendi le luci.

Schema elettrico

The Live wire is connected to the “L” terminal, The Neutral wire is connected to the “N” terminal, Lighting wire is connected to “L1, L2, L3” terminals.

1. Gang switch lighting wire connection: “L1” terminal
2. Gang switch lighting wire connection: “L1,L2” terminals
3. Gang switch lighting wire connection: “L1,L2,L3” terminals

Aggiungi dispositivo

Add device to “Smart Life” or “Tuya Smart” APP

1. Step 1: Download and install the “Smart Life” or “Tuya Smart” APP: Scan the QR code below
   
2. Step 2: Enter the phone settings option, turn on the Bluetooth and WiFi functions, and turn on the product at the same time
3. Passaggio 3: apri l'APP Smart Life, registrati e accedi al tuo account. Se hai un account Smart Life, accedi.
4. Step 4: Power on after the wiring is completed, the device is powered on by default, press and hold the touch wall switch button for about 8, until the WiFi blue LED flashes quickly, enter the network configuration mode
5. Step 5: Enter the App, click the “+” at the top right of the page to enter the network connection page.
6. Step 6: Make sure your device’s light is blinking quickly(2 times per second) tap to proceed to the next steр.
7. Step 7: Enter your WiFi and password
8. Passaggio 8: Assegna un nome al tuo dispositivo.
9. Step 9: When the WiFi LED is on, the device is online.
   Prendi il controllo adesso!

How to use smart speakers to control devices, such as Amazon Alexa, Google Assistant or T mall Genie?
Apri l'app Smart Life per accedere alla sezione "Io" view and find the user Quide for “Me” view and find the user guide the corresponding smart speaker

【Note: Before using the smart speaker, please log in to your account on Amazon Alexa Google Assistant, or T mall Genie.]

Introduzione del funzionamento del telecomando RF

Packaged products are paired at the factory and do this wirelessly. If you need to add or replace the remote control switch, please refer to the following steps

Metodo di associazione
Press and hold the touch wall switch button for about 3 seconds. The red LED indicator lights up to enter the RF433 pairing mode. At this time, press the RF433 remote control switch a few times and the indicator light flashes off. The switch is controlled and paired successfully.

Metodo di cancellazione del codice

Long press the touch wall switch button for 5 seconds until the red LED indicator flashes 3 times, the code is cleared successfully.